openSUSE Leap Micro 5.5

Leap Micro is an ultra-reliable, lightweight operating system built for containerized and virtualized workloads.

This community version is based on SUSE Linux Enterprise Micro, which leverages the enterprise hardened security and compliance components of SUSE Linux Enterprise. This merging of technologies provides for a modern, immutable and developer-friendly OS platform.

Leap Micro offers an offline image. The main difference between the offline and self-install/raw images are that the offline image has an installer. Raw and self-install allows for customization via combustion or manually in the image after it is written to the disk. There is an option for a real-time kernel.

Try Leap Micro in VMs running on either Xen or KVM. Using a Raspberry Pi or other System on Chip hardware may use the preconfigured image together with the Combustion functionality for the boot process. Both preconfigured and self-installed images are intended to be used with Combustion written to a USB, which is driven to allow configuration on any first boot, with the option for default password protected changes.

Download

A Short Leap Micro installation demo with combustion and cockpit.

Intel or AMD 64-bit desktops, laptops, and servers (x86_64)
صورة غير متصلة بالانترنت (2.1 GiB)
Self-install RealTime Image (1021.2 MiB)
Preconfigured Image (raw) (802.1 MiB)
Preconfigured Image (qcow) (959.2 MiB)
UEFI Arm 64-bit servers, desktops, laptops and boards (aarch64)
صورة غير متصلة بالانترنت (1.9 GiB)
Preconfigured Image (raw) (759.4 MiB)
Preconfigured Image (qcow) (920.2 MiB)

إختار الوسيط للتنزيل

The new self-install image is recommended for all who do not require custom partitioning and can boot from USB. A simple self-install wizard dumps a preconfigured image to the drive, and grows the partition to the size of the disk.
Users with Raspberry Pi and similar without usb-boot support can directly write the pre-conifgured image to the SD card. Users seeking more control over deployment are adviced to use Combustion.
A demo of a combustion based deployment can be seen here.
The jeos-firstboot will greet those who did not configure their system by using Combustion.

The Offline ISO Image should be use by those who require custom partitioning.

Minimum

  • 2 جيجابايت ذاكرة الجهاز: 1GB physical RAM + additional memory for your workload
  • Storage:
    • / (root) partition: 5GB available disk space
    • /var partition: 5GB available disk space

Recommended

  • 2 جيجابايت ذاكرة الجهاز: 2GB physical RAM + additional memory for your workload
  • Storage:
    • / (root) partition: 20GB available disk space
    • /var partition: 40GB available disk space

تحقق من الملف المنزل قبل الإستخدام

يمكن للعديد من البرامج التحقق من بيان التحقيق الجمعى (Checksum) للملف المنزل. من المهم التحقق للتأكد من حصولك بالفعل على ملف ISO الذي تريد تنزيله وليس بعض الإصدارات المعطلة.

نوفر بيان التحقيق جمعى (Checksum) و دالة هاش تشفيرية (SHA256) لكل ملف أيزو (ISO).

لمزيد من الأمان ، يمكنك استخدام برنامج GPG للتحقق من الشخص الذي قام بالتوقيع على هذه ملفات دالة هاش تشفيرية (SHA256).

يجب أن يكون AD48 5664 E901 B867 051A B15F 35A2 F86E 29B7 00A4

للمساعدة على التحقق من الملف المنزل رجاء قراءه مساعدة لبيان التحقيق جمعى (Checksum)